MATERIAL Raeford Mills style #645-437, 16 ½ to 17 oz., 55% Dacron/Polyester/45% Wool, 2-ply elastique, taupe color. Cloth shall be stamped with Kaumagraph stamp identifying the mill. STYLE Men’s slack type trouser, modified Military Dress style cut from up-to-date pattern. Trousers to have one (1) inch outlet running the full length of inseam. WAISTBAND Separate waistband to be two (2) inches wide same material to be sewn to the waistband curtain with a Zig-Zag Ro-Cap stitch. Inside waistband curtain to be constructed from 65% Polyester, 35% Cotton Twill with Snug-Tex and one (1) inch Ban-Rol. Waistband to be finished in an open manner (Browne outlet method) for ease in alteration, showing no raw edges for merging on curtain edges and to finish with a minimum of two and one half (2 1/2) inch outlet. Front closure to be made with one (1) crush proof hook and bar closure. Right fly lining and crotch piece line to be of same material as waistband curtain. BELT LOOPS A minimum of seven (7) tunnel belt loops with additional loops in proportion to waist size. Each loop to be one (1) inch wide by two (2) inches long. One (1) loop to be placed at rear seam with the other loops being proportionately spaced in back, on hips and in front. All loops with the exception of the back loop are to be sewn into top of waistband and bottom of waistband. The back center belt loop to be sewn to the outside of the waistband. POCKETS Two (2) front, two (2) hip and two (2) utility pockets. All pockets must be stitched, turned and top stitched (serge edges are not acceptable). Pocket material to be 7.4 oz. 72x60 all cotton drill natural shade. Hip and front pockets to be inserted into waistband curtain. Pockets to be firmly bar tacked at end of the pocket. FRONT POCKETS Side pocket style, six and one half (6 1/2) inches at the opening and size and one half (6 ½) inches deep at the bottom opening. HIP POCKETS Hip pockets to be located a minimum of three (3) inches below bottom of waistband and to be a minimum of five and one half (5 1/2) inches wide and a maximum of six (6) inches deep. Hip pockets to be made on Reece pocket machine #46 lock stitch with 3/16” double piping. UTILITY POCKETS Utility pockets to be located a minimum of three (3) inches below hip pocket and to be a minimum of three and one half (3 ½) inches wide at the opening and ten (10) inches deep. Utility pocket to be made on Reece pocket machine #46 or equivalent, lock stitch with 3/16” double piping.
