Specifications include, but are not limited to: The intent of this specification is to describe a straight reversible snow plow. The snow plow shall be suitable for mounting onto a Falls 26B or Monroe FLS26B type quick hitch on a 39,000 to 58,000 pound GVW rear-wheel-drive truck. The snow plow shall be of all steel fabrication, of rugged construction, and properly braced and reinforced. The fluorescent orange tubular plow markers shall be attached to both ends at the top or highest point of the plow to delineate the outside edges of the plow. The fluorescent orange tubular plow marker caps shall be fastened in an acceptable manner to prevent from being separated from tube. The fluorescent orange tubular plow markers shall also have a weep hole drilled into the bottom of the tube, preferably in the metal base, to allow moisture to escape.
