4-wheel drive loader/backhoe complete with equipment. • The backhoe with extendible dipper stick digging depth shall be a minimum of 17’-6” SAE. • The lift capacity at full height with extendible dipper stick retracted shall be no less than 3,200 lbs. • The lift capacity at full height with extendible dipper stick extended shall be no less than 2,000 lbs. • A swing lock pin shall be supplied and stored in a convenient location for the operator. • The stabilizer valve will be two directional, anti-drift. • The stabilizer shall have reversible pads. One side replaceable rubber pads, and the other steel. • Extendible dipper stick shall extend no less than 3’-5” in length. • The backhoe boom design shall be a power curve to allow for loading into the center of a truck bed. • The backhoe boom shall be an hourglass shape to ensure maximum strength and optimized visibility to the work tool. • Digging force with extendible backhoe, bucket cylinder will be at least 10,800 lbs (heavy duty cylinder). • The backhoe shall be equipped with rubber bumper linkage style boom locks to keep the backhoe from vibrating on the swing frame. • Unit shall be equipped with Pilot Operated backhoe controls with an in-cab electronic switch to swap over between SAE and ISO backhoe patterns. • The swing casting will have dual yokes: on top and on the bottom.
