GENERAL The truck is a 2025 International HV507SVA with a 171.00 wheelbase, 96.00 CA and 63.00 axle to frame. • Battery cables are 36 inches of extra length coiled and strapped near the battery box. • Battery box is on the left side of the cab. FRONT PLOW & WINGS • Custom Hitch with mtg. bolts nuts and pins • Custom Hitch Plow & Wing Mount-Power Tilt (include yoke) • Access Step • 4”x10” DA Cylinder (cannot be used with Husting Hitches) • No Pump Bracket • Push Center, 30-1/2” • Lift group-All plows except Metros with chain lift leveling device • Hose Connecting Bracket w/restrictor, fittings and disconnects • Quick Disconnects for Lift Cylinder • FH20 Hydraulic Assembly w/mtg. bracket (3x20cyl.) • Full Trip Hinge (not to be used with trip edge wing) • Quick Disconnects for Front Wing Cylinder (1 per front mast) • Rear Mast Weldment – includes slides, cylinders, mounting brackets – no tank • S40547 Rear Mast H1059IP RH Assy. CSS PLOWS • REVERSIBLE PLOWS, HEAVY DUTY POLYMER TRIP EDGE 10 DEG. • Reversible, HD Polymer Trip Edge 10-degree Moldboard • Moldboard Reversible, HD Polmer Trip Edge 10-degree • Carbide Blade, 12” punching, with steel cover blade-for 11’ Moldboard • Twin Cylinder (cushion valve) Power Reverse Pushframe (PRR) • 30-1/2” pushlug swivel • Dead Sheave Leveling Device (stainless steel cable) • Rubber Deflector 12” wide – for 11’ Moldboard • 132WHD RH WING WELDMENT – Standard RH Wing • Carbide Blade 12” punching, with steel cover blade – for 132 Wing • Full Trip Hydraulic Arm (cushion spring lower) DUMP BODY • Body – Beau – Roc Model – SSM410’0”x36”x48” Stainless Steel Dump Body, 1/4” Hardox Floor, 36” Sides 48” Tailgate w/Dbl Acting Air • 1 – Coal Door (center) • Access Ladder • Shovel Holder, 6” Apron OTHER • Plow Lights – Abl Led heated • Lights – Led Amber Strobes front & Side of Cab Shield, Led Amber Strobes, S/T/T & B/U in Rear Corner Posts, Led Wing & Spreader Lights. • Pintle Plate w/Hook, D-Rings & Trailer Plug • On Spots • Poly Fenders-Single Axle • Mud Flaps w/Anti-Sails • Donovan Electric Tarp System w/Asphalt Cover • Side Boards – 10” C Channel (Painted Black) SPREADER • Spreader – Swenson 9’ Stainless Steel Spreader, Stainless Steel Leg Stand, Rubber Side Shields, Front & Rear Deflectors, (2) 90 Gallon Calcium Tanks, Prewet Pump, Ladder, Spinner Assy • Vibrator • Hydraulics to include: Transmission Mounted Hot Shift PTO/Pmp, 40 Gallon Hydraulic Tank (behind cab) Hyd Oil, (6) Walvoil Valves, (6) Quadco cables, (1) Remote Handle (plow), FFL Valve, Hose Kit, Stainless Steel Lines Where Feasible, Prewet Module, Nozzle Kit. • Cirus EZ Spread Sander Controls
