Specifications include, but are not limited to: Provide all labor materials and supplies required to remove all hazardous materials from the Bushnell apartment complex prior to the demolition. Work shall proceed in a safe environment for both workers and the adjacent campus community.; • Clean Project site, yard, and grounds, in areas disturbed by construction activities, including landscape development areas, of rubbish, waste material, litter, and other foreign substances.; • Sweep paved areas broom clean. Remove petrochemical spills, stains, and other foreign deposits.; • Rake grounds that are neither planted nor paved to a smooth, even-textured surface.; • Remove tools, construction equipment, machinery, and surplus material from Project site.; • Remove snow and ice to provide safe access to building.; • Clean exposed exterior and interior hard-surfaced finishes to a dirt-free condition, free of stains, films, and similar foreign substances. Avoid disturbing natural weathering of exterior surfaces. Restore reflective surfaces to their original condition.; • Remove debris and surface dust from limited access spaces, including roofs, plenums, shafts, trenches, equipment vaults, manholes, attics, and similar spaces.; • Sweep concrete floors broom clean in unoccupied spaces.; • Vacuum carpet and similar soft surfaces, removing debris and excess nap; shampoo if visible soil or stains remain.; • Clean transparent materials, including mirrors and glass in doors and windows. Remove glazing compounds and other noticeable, vision-obscuring materials. Replace chipped or broken glass and other damaged transparent materials. Polish mirrors and glass, taking care not to scratch surfaces.; • Remove labels that are not permanent.; • Touch up and otherwise repair and restore marred, exposed finishes and surfaces. Replace finishes and surfaces that cannot be satisfactorily repaired or restored or that already show evidence of repair or restoration.; • Clean and ensure full legibility of "UL" and similar labels, including mechanical and electrical nameplates.; • Wipe surfaces of mechanical and electrical equipment, elevator equipment, and similar equipment. Remove excess lubrication, paint and mortar droppings, and other foreign substances.; • Replace parts subject to unusual operating conditions.; • Clean plumbing fixtures to a sanitary condition, free of stains, including stains resulting from water exposure.; • Replace disposable air filters and clean permanent air filters. Clean exposed surfaces of diffusers, registers, and grills.; • Clean ducts, blowers, and coils if units were operated without filters during construction.; • Clean light fixtures, lamps, globes, and reflectors to function with full efficiency. Replace burned-out lamps.
