Specifications include, but are not limited to: 1. Sign Backing: i. The sign shall be eight feet (8’) wide by four feet (4’) tall. ii. The sign backing material shall be minimum 3/4” nominally thick plywood. The plywood shall be of an exterior grade with a medium density overlay. 1. At the option of the Contractor, the sign backing material may be fabricated from aluminum sheeting and shall conform to MUTCD specifications for a traffic sign of equal size ; The Contractor shall document the entire project site paying particular attention to existing improvements to remain or to be replaced such as driveways, sidewalks, curb and gutter, existing roadway condition, landscape plantings and materials, walls, signs, streetlights, fire hydrants, utility boxes and vaults, cleanouts, mailboxes, etc. ; 11. 8” CMU Block (Split Face) 12. Rebar 13. Mortar: Type M / Type S 14. Grout 15. Type V, 4,500 psi Concrete Mix Design 16. Type II per Clark County Standards 17. Plumbing Fixtures 18. Plumbing Piping 19. Partitions 20. Electrical Conduit 21. HVAC 22. Steel Staircase and Guard Railing 23. Steel Doors and Hardware 24. Roll‐up Doors 25. Metal Roofing.