Specifications include, but are not limited to: 1.Roof of the roll-off container shall be teepee in design with the following approximate dimensions:a.Body Width: 23’ longb.Body length: 8’ widec.Body height: 7’ highd.Tepee Roof design, 30” tall2.Total container capacity 30 cubic yards 3.Standard outside rail, hook and cable system4.Four (4) compartmentsa.Approximate sizes of compartmenti.Compartments one (1), two (2) and three (3) all equate to 3.3 cubic yardsii.Compartment four (4), equates to 20 cubic yardsb.Reinforced compartment dividers with locking mechanism on driver’s and passenger side of containers. c. Compartmental dividers need to be on full height (top to bottom) with hinge on middle to allow recyclables to dump from container when locking mechanism is released from driver’s and passenger’s side. d.Hinged doors without track, inside central locking system.Runners on understructure to be 2 inches x 6 inches x 3/16-inch rectangular tubing with solid steel bull noses, rollers on the back withgrease zerks, and hard standson the front. 6.On driver’s side (left side if at rear) of container, a heavy-duty three-position positive locking cam type or step style rear door with machine hinges, grease fittings and a latch with safety chaincapable of keeping door in a locked position a.Door lock to engage by means of a single locking lever.