Specifications include, but are not limited to: FURNITURE, GENERAL A. All products of a design, material, and workmanship to withstand daily usage over an extended life with a minimum of maintenance and repair. B. Fabricate products square, rigid, without warp, and with faces flat and free of dents or distortions. All products safe to touch and free of rough or sharp edges. C. All products capable of being installed without penetration of finished surfaces or use of thru fasteners. D. Correct Quantities: Vendor responsible for providing correct quantities of each item necessary for a complete and functioning installation. E. Materials and Finishes: 1. Exposed Metal: Finished with manufacturer’s standard baked-on coating. a. Color: As selected from manufacturer’s standard range. 2. Molded Plastic: High-density polyethylene, blow or injection molded. a. Color: As selected from manufacturer’s standard range. 3. Plastic Laminate: NEMA LD 3, HGS (General Purpose type, 0.048-inch nominal thickness). a. Color and Pattern: As selected from manufacturer's standard range.