Specifications include, but are not limited to: 36" PLASTIC DRUM WITH RUBBER BASE 2.1 Model 2.1.1 Two-piece breakaway, closed-top design, consisting of reshape able upper drum body and detachable base. 2.1.2 Drum shall meet current MUTCD Federal requirements and crash-worthy requirements of NCHRP-350. 2.2 Drum Body 2.2.1 Material 2.2.1.1 Impact-resistant low density polyethylene. 2.2.1.2 Ultra violet and color stabilized. 2.2.1.3 0.3 Melt Index. 2.2.1.4 Low Impact Brittleness: greater than -50 c. 2.2.1.5 Material shall be capable of being reshaped to original form after vehicle impact. 2.2.1.6 Color: orange 2.2.2 Heavy duty drag handle with two mounting holes for barricade lights on top of drum. 2.2.3 āDā shaped drum bottom to minimize rolling after impact. 2.2.4 Dimensions 2.2.4.1 42" overall height including drag handle. 2.2.4.2 36" drum height. 2.2.4.3 18" minimum diameter, regardless of orientation. 2.2.4.4 Tapered design to facilitate stacking. 2.2.5 Reflective Sheeting 2.2.5.1 3M flexible high intensity grade material. 2.2.5.2 4 reflective 6" wide horizontal stripes, alternating orange/white/orange/white, top to bottom. 2.2.5.3 Non-reflective spaces between reflective stripes shall not exceed 3" width. 2.3 Base 2.3.1 Material: 100% recycled rubber, one-piece, vulcanized. TYPE III TRAFFIC BARRICADE 3.1 Model 3.1.1 Type III traffic barricade with break-away base design. 3.1.2 Barricade shall meet all Federal requirements and crash-worthy requirements of NCHRP-350. 3.2 Rails - Three (3) Per Barricade. 3.2.1 8' long x 8" - 12" wide high impact plastic rail. 3.2.2 Extruded high-density polyethylene material. 3.2.2.1 0.956 density 3.2.2.2 28 melt index 3.2.2.3 Ultra violet and color stabilized. 3.2.2.4 White pigmented. 3.2.3 Reflective Sheeting 3.2.3.1 3M flexible high intensity grade material. 3.2.3.2 8" wide reflective sheeting both sides of rail; 6" wide alternating orange and white stripes, sloping at 45-degree downward angle. Right-hand stripes one side, left-hand stripes on the opposite side. 3.3 Break-away Frame 3.3.1 Two (2) barricade base stands constructed of galvanized steel tubing, 1-3/4" sq. x 5' long. 3.3.2 Two (2) tube receivers constructed of galvanized steel tubing, 1-3/4" sq. x 7" long, 3.3.3 Two (2) barricade uprights constructed of galvanized steel tubing, 1 Ā½" sq. x 62" long.