QUANTITY: Two (2) DESCRIPTION: New current standard model Articulating/telescoping aerial device To be mounted behind cab Minimum 40’ to bottom of bucket on 33” chassis frame height Paint inside and out of all boom parts with powder coat paint process and color to match chassis Fiberglass line body Single one (1) man bucket Installed on LES supplied chassis by manufacturer or LES approved distributor and comply with all current applicable OSHA, ANSI and DOT standards. Aerial device to be certified at 46KV (Category C) DETAILS: Boom tip section fiberglass construction The outer surface of the fiberglass boom and articulating links fiberglass to have smooth gel coat finish Holding valves integral with all cylinders 360 degree continuous rotation Boom support and tie down to allow boom and platform to be stowed in load area/tail shelf area The main boom support mounted in the load area subframe The platform to set on dual rubber supports in the end hung position on the tail shelf with the step to the curb side and upper controls to street side Platform is not to extend rearward past the rear vertical plane of the body propore/tailshelf in the fully retracted, stowed position Full controls at pedestal with cargo work light mounted on the rearward area of pedestal just under rotation gear mounting flange. Light to be fixed and flush mounted with an in cab upper console mounted lighted rocker switch on the run side of the ignition Pedestal to be tall enough for machine to rotate clear of cab BUCKET: One (1) man fiberglass bucket (no liner) Dimension 24” x 30” x 42” deep End hung with one (1) inside/outside step. The outside top of step to be 24” below the top edge of bucket Access from curb side tail shelf escalator type steps Pistol grip, single handle, bucket control for all four boom functions - hand grip portion of handle to point toward chassis cab in the stowed position Controller to include an interlock guard 400# capacity platform Positive automatic leveling Bucket cover to be foldable and to completely cover the top of bucket with elastic stretch retaining strap with anchor lanyard Hydraulic platform rotation and tilt;180 degrees of platform rotation
