Specifications include, but are not limited to: A. Tables, General: 1. Tops: 1-1/4 inch thick minimum.; 2. All necessary supporting hardware supplied.; a. Components fastened with concealed tight joint connecting devices.; b. Levelers provided to accommodate height adjustment.; B. T1 - Conference Table (Alternate 1 item): 1. Basis-of-Design Product: Subject to compliance with requirements, provide the product specified or comparable product.; a. Basis-of-Design Product: OFS; Meeting Room.; 2. Top: Plastic laminate, matching wood veneer, with matching hardwood edge.; a. Edge Profile: As selected from manufacturer’s standard options.; 3. Shape: Rectangular.; 4. Base: Three wood veneer panel bases with wire management, style CB-12. ; C. T2 - Conference Table: 1. Basis-of-Design Product: Subject to compliance with requirements, provide the product specified or comparable product.; a. Basis-of-Design Product: OFS; Meeting Room.; 2. Top: Plastic laminate, matching wood veneer, with matching hardwood edge.; a. Edge Profile: As selected from manufacturer’s standard options.; 3. Shape: Rectangular.; 4. Base: Two wood veneer panel bases with wire management, style CB-D. ; D. T3 - Interview Table: 1. Basis-of-Design Product: Subject to compliance with requirements, provide the product specified or comparable product.; a. Basis-of-Design Product: Bernhardt Design; Anza.; 2. Top: Plastic laminate, matching wood veneer.; 3. Edge: Reverse bevel with 3mm matching edge band.; 4. Base: Wood veneer base with four 30-lb counterweights, style FBS. ; A. Wood Casegoods, General: 1. Substrates balanced 3-ply construction with 45 lb/cu. ft MDF materials.; 2. Tops: 1-1/4 inch thick minimum with shaped edges.; 3. Drawers: Wood with mitered or doweled corners.; a. Full-extension heavy-duty glides rated at 100 lbs minimum.; b. File drawer with metal file frame around perimeter to allow use of hanging files.; 4. Provide with integrated wire management. ; B. WC1 - Desk: 1. Basis-of-Design Product: Subject to compliance with requirements, provide the product specified or comparable product.; a. Basis-of-Design Product: Darran; Richmond Park.; 2. Top: Plastic laminate, matching wood veneer, with matching hardwood edge.; a. Edge Profile: “Traditional” for all four edges, profile Classic.; 3. Chassis: Solid wood veneer, double breakfront with minimum overhang of 6 inches.; a. Veneer Grade: A or AA, bookmatched.; b. Veneer Species: Walnut or Cherry.; c. Base Molding: “Traditional” required. ; C. WC2 - Credenza: 1. Basis-of-Design Product: Subject to compliance with requirements, provide the product specified or comparable product.; a. Basis-of-Design Product: Darran; Richmond Park.; 2. Top: Plastic laminate, matching wood veneer, with matching hardwood edge.; a. Edge Profile: “Traditional” for front and end edges, profile Classic.; 3. Chassis: Solid wood veneer.; a. Veneer Grade: A or AA, bookmatched.; b. Veneer Species: Walnut or Cherry.; c. Base Molding: “Traditional” required.; d. Chassis Molding: Not required. ; D. WC3 - Bridge to Install on HAT base: 1. Basis-of-Design Product: Subject to compliance with requirements, provide the product specified or comparable product.; a. Basis-of-Design Product: Darran; Central Park.; 2. Top: Plastic laminate, matching desk wood veneer, with matching hardwood edge.; a. Edge Profile: “Traditional” for front and end edges, profile Classic. 1) “Flat” end edges would be considered.; 3. Dimensions: 24 inches x 48 inches. ; B. Metal Filing Cabinetry, General: 1. Welded steel frame construction to provide maximum structural integrity and constructed in a manner that will prevent warping, twisting, or sagging.; 2. 22 gauge formed steel exterior.; 3. Provided with leveling devices to compensate for uneven floors. ; C. Laminate Filing Cabinetry, General: 1. Doweled assembly construction to provide maximum structural integrity and constructed in a manner that will prevent warping, twisting, or sagging.; 2. 3/4-inch thick, 45 lb/cu. ft MDF materials.; a. 1-1/8-inch thick case bottom.; b. Both faces finished with HPL laminate.; c. Exposed edges finished with 1.5 mm plastic, vinyl, or PVC trim.; 3. Provided with leveling devices to compensate for uneven floors.; D. LF1 - Lateral File for Systems Offices: 1. Material: Metal.; 2. Drawer Glides: Full-extension heavy-duty rated at 200 lbs minimum.; 3. Pulls: Manufacturer’s standard full-length recessed pull.; 4. Locks: Each cabinet provided with removable core and gang-key lock. ; E. LF2 - Lateral File for Open Office and Common Areas: 1. Material: Metal.; 2. Drawer Glides: Full-extension heavy-duty rated at 200 lbs minimum.; 3. Pulls: Manufacturer’s standard full-length recessed pull.; 4. Locks: Each cabinet provided with removable core and gang-key lock.; 5. Counter-Weights: Yes. ; F. LF3 - Lateral File: 1. Material: Metal.; 2. Drawer Glides: Full-extension heavy-duty rated at 200 lbs minimum.; 3. Pulls: Manufacturer’s standard full-length recessed pull.; 4. Locks: Each cabinet provided with removable core and gang-key lock.; 5. Counter-Weights: Yes.
