Specifications include, but are not limited to: 4.1. Contractor shall have a body shop facility that meets the following requirements: 4.1.1. An on-site EPA licensed paint booth OR an on-site, dedicated area for vehicle work to be completed; and 4.1.1.1. Paint booth shall be able to accommodate a full sized minivan with overall measurement of approximately 203” in length X 74” in height X “150 in width. 4.1.2. An inside or secure storage area for the transit vehicles. 4.2. Contractor shall prep the transit vehicles to receive paint OR vehicle wrap to match paint scheme, per Attachment A. 4.2.1. Paint scheme shall include four (4) colors, per Attachment A. 4.2.1.1. Base color of the vehicles shall be white, as delivered from the factory. 4.2.1.2. Paint colors PMS #534, PMS #7739, and PMS #7488 shall be painted on vehicle per Attachment A. 4.2.1.2.1. All paint shall be base coat/clear coat acrylic, activatorhardened acrylic or polyurethane type. 4.2.1.3. Lettering, numbering, signs, symbols, and striping shall be decals. 4.2.1.3.1. Paint colors applicable for lettering, numbering, signs, symbols, and striping shall be PMS #534, PMS#7488, and bright white. 4.2.1.3.1.1. Vehicle numbers shall be three (3) digits. 4.2.1.3.1.1.1. Numbers 136-143. 4.2.2. Vehicle wrap shall include four (4) colors, per Attachment A. 4.2.2.1. Base color of the vehicles shall be white, as delivered from the factory. 4.2.2.2. Design shall be per Attachment A. 4.3. Contractor shall be responsible for fuel from the StarTran Garage to the location where services will be performed, if outside Lincoln City limits.