1.1 Service body shall be fabricated from steel. 1.2 Body to have structural steel channel understructure, fully welded throughout, checkered type floor plate, heavy duty double paneled doors with spring loaded latches and keyed locks. 1.3 Bidders are to supply full details of materials to be furnished with bid. 1.4 Body to be painted WHITE. Exterior floor and bumper to be coated with sprayed on polyurethane slip resistant Rhino liner or equivalent. 1.5 Fuel fill: Aluminum fill cup and tethered fuel cap. 1.6 Body Specifications: Overall Length 108” Overall Width 94” Floor Width 54” 1.7 Compartmentation: Left Side L1 33”x40” L2 50”x24” L3 27”x40” Right Side R1 33”x40” R2 50”x24” R3 27”x40” Rear Steps To have a step entry to the body/boom on the curbside rear tailboard area. To have a storage compartment built into the step area extending the full width of the body. 1.8 To have 3 pull out shelves in each of the following cabinets. L2, 1.9 Shall have a tail shelf to extend a maximum of three feet beyond the rear of the body with an ICC bumper. 1.10 Construction Body 14 gauge galvanized steel Floor ⅛” tread plate steel Electrostatic primer 6 Year rust out warranty Service body to be undercoated
