Specifications include, but are not limited to:
Contractor shall provide all labor, equipment, materials, incidentals and traffic control necessary to produce, haul, place, roll and broom approximately 83,659 square yards of laid-in-place chip seal. The chip seal will be approximately 4.0 miles long and 31 feet wide. Quantities include an additional 40’ x 1,230’ through town for parking areas. Contractor shall provide CHFRS-2P asphalt emulsion and Type 1 chips. Traffic control with pilot cars must be maintained until dusk or fading light each workday as determined by the Project Manager. Contractor must provide enough pilot cars to keep traffic stops to a maximum of 15 minutes.