Specifications include, but are not limited to: Contractor will provide all labor, equipment, materials, incidentals and traffic control necessary to produce, haul, place, tack and compact approximately 8,875 tons of ¾” Commercial Plant Mix Grade S 64-28 asphalt mix material. The overlay shall be paved 0.15 feet thick and approximately 24 feet wide. There are 23 paved private approaches that Contractor will be required to pave a 2.5-foot-wide pass across from the new pavement edge out, feather out same and roll with a small roller to get compaction. There is a bridge located within the project at MP 0.57. Milled tapers of 0.15 feet depth from bridge both directions to a length of 120 feet will be required along with the same tapers at the start and end of the project.