WATERBED: Length: 15', Width: 92”, Approximate Depth: 28” Capacity: Approximate 2000 Gallons 1/4" steel plate construction; fully baffled; wheel wells. 6" x 4" full length heat manifold/hose storage chamber looped through. Heavy duty bangboard. 3" front fill. 4" full length stake rails with 4" channel stakes. (4) Mid-deck stakes in-line on center line of tank shall be evenly spaced. Rear three shall have rollers. Water level gauge. Tank vents on bangboard verticals setback side. (2) 2" front corner drains with valves. (1) 3" rear drain with 2” bushing & valve. (1) 4" rear drain with plug. (4) mud flaps. 4-point "flex" mounting with heavy duty rubber frame cushions. Interior Coating shall be FDA and EPA approved for potable water. 60” rear roller center mounted. (1) 8” chain vise. 3200 lbs capacity electric crane. Crane base installed right rear. (3) Cargo winches. Rear plumbing shall be configured for frame mounted glad hands and pintle hitch. The glad hands and hitch will be mounted by the Montana Department of Transportation. DIESEL FUEL TANK: Size: 22" x 24" x 68" Capacity: Approximate 150 Gallons (2) 2" female top ports. 3/4" drain ports. Vent/fill cap shall be located on driver side. Fuel level gauge(A-2007). DC 12V fuel transfer pump with fuel filter. 50' auto-rewind hose reel mounted on RH rear of fuel tank shall also include ¾”x 50’ hose. Swivel; nozzle and in-cab switch. Fuel tank shall be elevated on bangboard. TOOL BOXES: QTY: 1 Size: 4' x 2' x 20" Material: 1/8" plate steel Location: front under; Hinge-down heavy duty workbench doors. Drain holes. Snap latch-lockable. Flush bottoms. (2) deck access ladders (1 on each side). Vertical Toolbox: QTY. 1 Size 24” x 24” x 64” Material 1/8” plate steel. Location driver side bangboard Snap latch-lockable. Shelving. Drain holes.
