Provide proposal with description and pricing to design provide and build a structure to hold lighting and sound equipment, must be suitable for the location. To provide electrical and data (DMX or IP) infrastructure required for your design. The project must also include layout drawings, and bill of materials and engineering certificates for the completed build. The electrical system must be able to run additional lighting that could be added to the structure. Lighting will be controlled by a master switch and simple DMX controller (wall or rack mounted); lighting must be LED, IP56 rated and addressed individually to allow for more complicated control if required. Lights must provide a good and even wash across the stage area. All truss bases must be incased or otherwise covered to prevent climbing, with appropriate signage. All work is to be done by licensed and insured contractors.
Please also include a price to run: NL4 and NL8 and a 20-amp circuit to the top of each speaker bay.
Main Electrical Service
- Existing electrical panel located: stage right
Site work excavation
-Additional concrete footings may be poured if required by design.
Successful bidder will install the following:
- Include layout and drawings
- Set a front truss with two speaker bays, truss should follow roofline
- Set a rear truss
- Truss should not obstruct sightlines
- Provide and install decals marking SWL of the structure
- Contractor shall provide a turnkey job by properly installing all lights, cable, connectors and providing some simple programming on the controller, aiming lights, and providing all materials
- Provide final engineering certificate for the structure
Statewide