Specifications include, but are not limited to: Work under this RFQ shall consist of the removal of the existing video detection equipment as found in the traffic signal cabinet as well as the associated field equipment and wiring as identified in the provided attachment. The existing video detection system, manufactured by ITERIS, uses (6) detection cameras and (1) ITERIS Vantage Plus processor rack. The field wiring between the cabinet and each camera consist of (1) 16/3 cable and (1) co-ax cable per camera. Work under this RFQ shall also include the installation of a new video detection system (MoDOT-furnished) at the locations as identified in the provided attachment. The contractor shall furnish and install any necessary new mounting posts and hardware needed to mount cameras at each location. Acceptance shall also include testing the system for proper operation, proper configuration and alignment of the detection zones, counts and classifications as required by the manufacturer specifications and applicable MoDOT standards and specifications.