Specifications include, but are not limited to: Installation of Motorola Dual Band Radio including trunk unit, control module, two antennas and antennae wiring. Unit to be tested to be operational. Radio Unit will be new in the box or a previously installed unit. • Install of Code 3 LED Light bar and all related wiring. Cable to be run inside the vehicle and out the vehicle through the vehicle roof under the light bar with a water tight connection. • Re-install of Code 3 Light/Siren control box, speaker, and external siren. All equipment to be tested to be operational. • Install of flasher module for rear lights. • Install of strobes in front light housing (housing has been pre-drilled). • Install of cup holder and arm rest components. • Install of Supra Lockbox in fender. Location to be specified by Fleet Manager. • Install of Vehicle Battery Protection Device, i.e. Charge Guard. • Install of a 12-volt accessory 3 plug power outlet box. • Install of siren behind front grill using provided bracket. *Install keyless remote module for doors and trunk. * Install M180 intersection lights below side mirror. *Install rear license plates lights (when specified). All installed equipment to be tested and demonstrated to be operational by vendor. Interior of vehicle to be vacuumed and wiped down by vendor at completion of equipment installation.