Specifications include, but are not limited to: 4.Chassis4.1.Current model year Ford E-450Super Duty Cutaway DRW4.1.1.GVWR –14,500 lbs.4.1.2.158” Wheelbase4.1.3.6.8L Triton V10 –305 HP, 420 lb.-ft. Torque4.1.4.6-speed TorqShift/Select Shift automatic double override with Tow/Haul Mode4.1.5.E-Series Ambulance Prep Package (47A)5.Lighting5.1.The existing light bar (Code 3 MX 7000) shall be removedand remove one center white light and weld holes shut. (7) Whelen 900 LED lights shall be installed across the frontof the boxR/B,/R/B,/R/B,C,R/B,R/B,R/B.5.2.The existing Lights on all sides of the unit shall be removed and returned to customer. (12) NewWhelen LED 900 Series lights shall be installed after moduleis painted. Lights shall beRed/Blue lights. All lights shall have new chrome flanges installed.5.3.The existing intersection strobe lights in front fenders shall be replaced with (2) Whelen 700 Red/BlueLED Lights.5.4.The existing scene lights on the sideand rear shall be removed and replaced. 2 rear side and rear scene lights shall be replaced with Whelen 900 series scene lights shall be installedafter paint.Front side scene lights shall bereplaced with Whelen Pioneer Plus surface mount dual flood/spot combination PCPSM1C lights. All lights shall have new chrome flanges installed.5.5.All module clearance lights shall be replaced with LEDclearance lights, or equivalent,with the proper colored: amber and red. 5.6.Taillight/stop lights shall be replaced with Whelen 600 series LED lights. Directionalshall be replaced with LEDamber lens. Backup lights shall be replaced with LED lights.5.7.License plate fixture and lights shall be replaced with similarequipment.5.8.Remove existing fluorescent bulbs and ballast from Thin Light checkout lights and install new LED light inserts into existing housings. Total (2) 36” lights.5.9.Dome fixtures shallbe replaced with new LED two-stage lighting with chrome flanges. Total (8)5.10.Replace action area light with similar modelLED light. 5.11.Remove existing strobe lights over rear wheels and install new Whelen 700 Red/BlueLED lights.5.12.Add rope style LED cabinet lighting to replace the current dome style lighting. 6.Electrical6.1.The addition of Onspot automatic tire chains to the chassis. The activation switch shall be located at the center console. 6.2.The existing Kussmaul Brand auto ejection shoreline unit, which will activate upon starting the unit, shall be removed and replaced with a heavy duty 20 amp Kussmaul brand auto eject. Return old unit to the customer. There shall be an INDICATOR LIGHT installed above the shoreline plug that illuminates to indicate power past the GFI Breakers6.3.All wiring, solenoids, relays and circuit breakers shall be replaced. Existing solid-state main circuit board shall remain..6.4.All charging cable shall be replaced using minimum #0 Ga. cable.There shall be battery, ignition and round studs added behind driver seat for two-way radio connections, a cover will be installed over studs for protection.6.5.Theengine cowl mounted switch panelshallbereplaced, and the existing console wiring for switches rerouted to console. There shall be a new radio console with dividers mounted to the front of the switch console. Refer to Attachment 1 for switch location.6.6.Each unit shall have a new rear switch panelinstalled. Refer to Attachment 2 for location, function and type of switches. 6.7.The inverter and charging system shall be inspected for output and performance. Contact the customer for instructions of units that fail performance testing.The inverter switch shall be replaced with a 30 minute timer, without a hold feature.6.8.Existing siren shall be replaced with a Siren that is acceptable with the District. Siren control head shall be mounted in driver’s console in space provided. Siren amplifier shall be mounted at a pre-determined location agreed upon by customer.6.9.Install Buel air trumpets (1062 and 1063) mounted under the front bumper. Install compressor (Buel 5440) and reservoir in a location mutually agreed upon by remounter and District. Horn shall be actuated by a momentary switch located on the switch panel (see attachment 1)and activated only when in emergency mode.A vented box shall be installed to protect the compressor and wiring.Old horns and systems shall be returned to the District. 6.10.A remote cab lock switch shall be installed in the front grill to the left of the Drivers headlight.6.11.A new rear HVACunit of equivalent design and output shall be installed on unit. Electronic water valves and servo shall be replaced and installed in an appropriate serviceable area. 6.12.General inspection ofall electrical connections and appliances to insure proper function replace or repair as necessary.