Specifications include, but are not limited to: Paint Application: Paint may be applied by brushing or rolling. Paint shall be applied smoothly and evenly without runs, sagging, ridges, laps and brush marks with consistent sheen. Apply coating at spreading rate required to achieve the manufacturers recommended dry film thickness. Regardless of number of coats specified, apply as many coats as necessary for complete hide and uniform appearance. The contractor shall ensure that all coats are dry before applying succeeding coats. Minimum (4-5 mils) dry coat total. Door Frames – All door frames in work area are to be mechanically prepped or sanded. Bonded with primer, if prepped to bare metal if not using DTM product. Paint Products: Benjamin Moore Ultra spec scuff-x- egg shell for walls and door jambs. Preparation: Note the cove base will remain.