Specifications include, but are not limited to: The contractor shall provide multi-gas calibrators on an as needed, if needed basis as ordered by the state agency. The contractor must comply with all mandatory requirements and specifications presented herein pertaining to provision of multi-gas calibrators;
The calibrators shall meet or exceed the following
Flow accuracy: 1.0% from 10 to 100% of full scale flow
Repeatability: 0.05% from 10 to 100% of full scale flow
Warm-up Time: 30 minutes
Operating Temperature: 0 – 50 C
Maximum Weight: 30 pounds
Power Requirements: 115 VAC @ 60 Hertz.