Specifications include, but are not limited to: 1. Castle Point Park a. 2 Doors & Frames - 1) RH & 1) LH Rough opening 40 1/4" x 84 1/4" Concrete Block b. Doors: Hollow Metal Exterior, Flush, 18 gauge A60 galvaneal steel with seamless welded edges; Closer, lock and hinge reinforcement. Standard baked-on prime coat finish. To be set-up to accept “Best” tubular deadbolt installation with 2-1/8” diameter hole and 2-3/4” backset, located at 48" centerline above floor. QTY: 2 c. Frames: – 16 gauge A60 galvaneal steel; 6 3/4 ” finished jamb depth; 2” jamb face on both sides and 4" Header. Frames to be set-up and welded at mitered corners and ground smooth. Punched and dimpled for concrete block anchors. Standard baked-on prime coat finish. QTY: 2 d. Hinges: 4-1/2” x 4-1/2”, satin stainless steel, full mortise, standard weight, ball bearing, NRP, US26D. QTY: 6 e. Door Closers: non-handed, adjustable to size 2 through size 6. Ten year warranty. “LCN” model 4041 XP Super Smoothee or equal. Aluminum finish. QTY: 2 f. Pull Plates: Stainless Steel, 4” x 16” x 1/8” W/ grab handle. Rockwood model # 70CX110 or approved equal. QTY: 4 g. Threshold: Zerro 655 -- 5" x 1/2" x 36" Aluminum finish. QTY: 2 2. Queeny Park a. 2 Doors – 1) RH & 1) LH doors only 35 5/8” x 79 ¼” (see attached drawing) b. Doors: Hollow Metal Exterior, Flush, 18 gauge A60 galvaneal steel with seamless welded edges; Closer, lock and hinge reinforcement. Standard baked-on prime coat finish. To be set-up to accept “Best” tubular deadbolt installation with 2-1/8” diameter hole and 2-3/4” backset, located at 48" centerline above floor. QTY: 2 c. Hinges: 4-1/2” x 4-1/2”, satin stainless steel, full mortise, standard weight, ball bearing, NRP, US26D QTY: 6 d. Door Closers: non-handed, adjustable to size 2 through size 6. Ten year warranty. “LCN” model 4041 XP Super Smoothee or equal. Aluminum finish. QTY: 2 e. Pull Plates: Stainless Steel, 4” x 16” x 1/8” w grab handle. Rockwood model # 70CX110 or approved equal. QTY: 4