Specifications include, but are not limited to: • Sawcut and remove broken asphalt around two drains with areas approximately 3-foot by 12-foot and 3- foot by 20-foot in front parking lot. Fill with 4-inches of hot mix asphalt, roll and compact. • Clean cracks 3/8-inches or wider or dirt, debris and vegetation to insure bonding of crack sealing material. Seal these cracks with rubberized hot pourable crack sealant. • Clean areas to be sealed with high pressured blowers and steel bristle brooms where necessary. Scrub and treat oil spots where necessary with oil spot prime to aid in adhesion of sealer in these areas. Apply one coat of pavement sealer at the rate of 0.12 to 0.15 gallons per square yard. Application to be with mechanical sprayer and hand squeegees or brooms for trim work areas. • Restripe parking lot and match the same paint color, location, symbols of all existing pavement markings.