Specifications include, but are not limited to: One 2,500 foot reel at $1.50/ft estimate - - #4 AWG copper wire, at least 7 strand, 600 volt insulated, UL listed type RHH/RHW-2/USE-2/VW-1, black in color, heat & moisture resistant, cross-linked polyethylene and/or ethylene propylene rubber (EPR) insulation and about 30 mil thick jacket, conforming to the following: (a) insulation meets ICEA S-95-658, NEMA WC-70 and UL standards 44 & 854 (b) sunlight resistant, and resistant to weather, oils, acids, & alkalies; (c) for indoor or outdoor use, &/or for use in cable trays, direct burial (in earth), raceways, &/or underground ducts; (d) Cable rated 90ºC dry or wet, suitable for 130ºC emergency conditions and 250ºC short circuit conditions; (e) mechanically rugged yet flexible for easy installation; (f) stable electrical properties; (g) approximate ampacity 95 amps; (h) surface printing stating manufacturer, type of cable and conductor size. Furnish conductor on one non-returnable reel with one continuous approximately 2,500 ft or longer run. Reel to be tagged with total footage, gross, tare and net weights, type of conductor and manufacturer. The #4 AWG power cable shall be equal to Okonite Okoguard-Okolon Catalog # 112-24-2251. Alternate cable bids will be considered provided catalog cut sheets with manufacturer's specification descriptions are supplied with the bids submitted.