Specifications include, but are not limited to: - (CU 0302345)PIPE JOINT LUBRICANT FOR PVC AND COUPLINGS PER THE FOLLOWING SPECIFICATIONS: 1. CERTIFIED TO: ANSI/NSF 61 2. CONTAINER SIZE: 1 QUART (32 OZ.) 3. SUITABLE FOR BOTH SUMMER AND WINTER USE. - (CU 303091) COMPACT DUCTILE IRON BEND, 12 INCH MECHANICAL JOINT X 12 INCH MECHANICAL JOINT, 22 1/2 DEGREE, PER THE FOLLOWING SPECIFICATIONS: 1. CONFORM TO AWWA C153, LATEST REVISION 2. PRESSURE RATED AT 350 PSI, MINIMUM 3. MECHANICAL JOINT ENDS PER AWWA C111, LATEST REVISION. OMIT MECHANICAL JOINT ACCESSORIES. 4. CEMENT MORTAR LINING PER AWWA C104, LATEST REVISION 5. ALTERNATE INTERNAL AND EXTERNAL EPOXY COATING THAT MEETS OR EXCEEDS THE REQUIREMENTS OF AWWA C116 IS ACCEPTABLE. : - (CU 301300) DUCTILE IRON NIPPLE, 4 INCH FLANGE X 4 INCH PLAIN END, PER THE FOLLOWING SPECIFICATIONS: 1. CONFORM TO AWWA C115, LATEST REVISION 2. FLANGE: CLASS 125, DUCTILE IRON PER AWWA C110, LATEST REVISION 3. PIPE: DUCTILE IRON, CLASS 53, PER AWWA C151, LATEST REVISION 4. CEMENT MORTAR LINING PER AWWA C104, LATEST REVISION 5. ASPHALTIC EXTERNAL COATING 6. LENGTH: 36 INCHES - (CU 309831) FIRE HYDRANT LUBRICANT OIL IN 10.5 OZ. CANS. LUBRICANT TO BE USED FOR MUELLER 107 AND MUELLER CENTURION TRAFFIC MODEL FIRE HYDRANTS. - (CU 0301954)FIELD LOK GASKET PER THE FOLLOWING SPECIFICATIONS: 1. SIZE: 8-INCH 2. CONFORM TO AWWA C111, LATEST REVISION 3. FOR USE WITH 8-INCH TYTON JOINT PIPE. - (CU 305242) BELL JOINT CLAMP FOR 18-INCH CI/DI PIPE PER THE FOLLOWING SPECIFICATIONS: 1. BELL-SPIGOT RING: DUCTILE IRON PER ASTM-536 2. GASKET: GRADE 60 COMPOUNDED FOR WATER SERVICE 3. BOLTS & NUTS: HIGH STRENGTH LOW ALLOY STEEL PER AWWA C111, LATEST REVISION 4. O.D. RANGE: 19.23 TO 19.98 INCHES.
