Fiberglass Pole - Direct Bury, 14’ Mounting Height 17’ total height, 3” diameter fiberglass pole with 3 ½” steel or aluminum tenon on top, 14’ mounting height with 3’ embedded Yes No The pole shall be constructed by the filament winding process from thermosetting polyester resin and contain a minimum of 65% fiberglass and a maximum of 35% resin by weight. The filament winding process shall be continuously applied with uniform tension and the winding shall be placed on the bole vertically at low angles to provide aerial strength. Additional windings shall also be placed on the pole in a circular manner to provide compression strength Yes No A coating shall be applied to the pole to maintain surface integrity against the damaging effects of sunlight and extremes in weather. The coating is to be highly weather resistant pigmented polyurethane. The coating thickness shall have a minimum dry film thickness of 1.5 mils Yes No 1 ½” diameter wiring hole Yes No When installed to a 3’ setting depth, the pole shall be able to withstand a 475 lb horizontal load applied 12” from the top of the pole without damage Yes No
