Asphalt Curb Repairs- Replace approximately 60' linear of asphalt curb, in two separate locations. New curb must match profile of existing curbing. Asphalt sealer- Apply 2 separate coats of commercial-grade coal tar sealer, Action Pave RT or approved equal, per the manufacture's recommendation (submittals required). The pavement sealer is to include 2-3 pounds of sand per gallon. 1st coat – mix per 100-gallon RT - 30 gallons water, 200 pounds sand, with an application rate of 0.20 gallon per square yard applied with a squeegee. 2nd coat – mix per 100-gallon RT – 30 gallons of water, no sand, application rate of 0.15 gallon per square yard, spray applied. Striping- Stripe parking lot per attached plan, using an acrylic polymer water base fast drying traffic paint in white and blue. All lines shall be 4" wide and shall be placed in a workmanlike manner.