Specifications include, but are not limited to: LED Mongoose style luminaires must work in a 120V or 240V powered system. LED luminaires must come with shorting caps (3 pin NEMA Photo control Receptacle) or be designed to work in a MoDOT built Lighting system that utilizes a single lighting controller cabinet with one photo cell for operation. LED luminaires must have a terminal block for easy installation of a two wire Line/neutral circuit (no wire nuts for termination of field/luminaire circuit). LED Mongoose style luminaires must be high tilt type, capable to tilt 27 to 45 degrees. Type III Light distribution is needed for all LED Luminaires. All LED Mongoose style luminiaires must be 3K/ 3000K CCT, 70 CRI Min. All LED Mongoose style luminaires must be able to be mounted onto a 2 3/8” Outer Diameter pole top.