Specifications include, but are not limited to: 3.5 Installation/Testing: 3.5.1 The contractor shall provide full delivery of the Industrial CNC Router System . 3.5.2 The contractor must furnish all related equipment, materials, and supplies as specified herein; including all hoses, wires, etc. for utility connections. The state agency will ensure that utilities are available at the point of hook-up. 3.5.3 Once installed, the contractor shall perform testing to ensure all equipment is operating in accordance with the manufacturer’s specifications and requirements and to the satisfaction of the state agency. 3.6 Training: 3.6.1 If deemed necessary by the state agency at no additional cost to the state, the contractor shall provide a minimum of one (1) day of technical training for all necessary state agency personnel regarding operation and maintenance of the Industrial CNC Router System. Minimum cutting area 60” X 120” 240- Three Phase Electric Ability to cut 5’ X 10’ materials Dust collection system/ vacuum pump system minimum 450 CFM Minimum 10hp auto tool changing spindle Minimum 12” gantry & spindle clearance Welded steel tube frame and bridge PC, Monitor, Keyboard, Mouse and Windows 10 with SSD 250G minimum. hard drive and 4G Ram minimum PCI controller board installed and able to function in shop setting Ability to be networked with PC to PC connectivity Auto Cad compatible software and Non Subscription programming with software updates provided for life of system. X & Z Axis drive system: Single driven, 16” Z stroke