• Outside Maximum Dimensions: 2.0” H x 6.0” Width x 13” Length (including mounting bracket) • AC Circuit breaker rated at least 15 amps • 15A maximum for all outlets • Manual Circuit Breaker Reset • 2 lines front panel backlit LCD display with power save option • Reset-to-factory-default switch • Circuit Breaker Manual Reset-to-factory-default Switch • Removable Input Power Cord • Ethernet Interface 10/100 autosensing, Static IP, TCP port selectable, 8 pin RJ-45 with internal FCC filtering • An on/off switch • At least six (6) individually switched outlets for remote device reboot • Minimum two (2) unswitched (always on) outlets for AC plugs • Bare Weight of a single unit shall be less than 5.0 lbs. excluding cord and packaging • Relative Operating Humidity range of at least 8-80% • Operating temperature of -30 to 170 degrees Fahrenheit • Software Control shall have an individual and all on/off outlets cycle • Surge Protection of minimum 3600W Metal Oxide Varistor • Internal Real-Time-Clock with minimum 10 year Li battery, NTP Supported The power strip shall be accessible through a simple web interface compatible with any standard browser. The web interface shall have password security, allow for the remote rebooting of individual devices, and shall contain a description of the attached devices.
