Specifications include, but are not limited to: 1. Removal and replacement of the following equipment: a. Remove Flight Light L-880 4-Box PAPI light system, replace with same or approved equivalent i. NOTE: Existing Flight Light system has four legs per light on individual concrete pads; b. Remove Flight Light L-880 PAPI Power Adapter and Tork 5007M photocontroller, replace with same or approved equivalent; i. PAPI’s operate day or night using pilot control radio decoder c. Remove Rural Electric Radio Decoder (pilot-controlled) w/antenna, L-854 Type 1 Style A, replace with same or approved equivalent; d. Remove Eaton Heavy Duty Safety Switch, replace each with same or approved equivalent; e. Remove Square D/Schneider Electric General Purpose Transformer, replace each with same or approved equivalent; f. Remove Emerson Hevi-Duty General Purpose Transformer, replace with same or approved equivalent; 2. PAPI system shall be wired into existing Runway 18 PAPI circuit and ground wire. 3. All components removed shall be disposed of off-airport by the Contractor