1) (A) (B) (C) 2) (A) (B) (C) (D) (E) The contractor must supply additional motor vehicle workstation equipment at the contractor's expense, if the state agency: Increases the number required, but does not provide the additional equipment; Decreases the number supplied, but does not decrease the corresponding number required; or Determines replacement is required if broken or inoperable and no replacement is available, or if machine was broken or rendered inoperable due to misuse by license office personnel. The contractor may further enhance customer service by providing additional workstations upon approval by the state agency. All contractor-provided workstation equipment shall be installed at the contractor's expense and must meet or exceed state agency requirements. Contractor-provided equipment shall remain the property of the contractor. For any contractor-provided equipment, the state agency will install and administer any state agency-designated software applications or updates that are required for license office operations and shall retain ownership of any such computer software applications and updates. All contractor-provided workstation equipment must be wiped prior to its removal from service in a license office. The state agency will coordinate this responsibility. Contractors are encouraged to obtain a restore disk at the time they purchase the computer to use after the machine is wiped. The repair and maintenance of any contractor-provided equipment shall be the responsibility of the contractor.
