Specifications include, but are not limited to: Description This anti-corrosive de-icer is an enhanced highway deicing salt product containing a corrosive inhibitor. Compliance This product shall comply fully with ASTM Specification D 632-99 Type 1, Grade 1. Application This anticorrosive de-icer shall be applied at the same rate as regular highway de-icing salt. Storage This anticorrosive de-icer shall require no special handling, equipment, or labor over and above that used for regular highway de-icing salt. No special precautions other than tarping shall be required. Chemical Analysis Component Sodium Chloride Corrosion Inhibitors Units % % Typical 96 1.8 Specifications 93.3-97.2 2.0 max Sieve Analysis U.S.S Opening Opening Typical Specification Mesh Inches Microns % 0.500 12700 100 100 min. 3/8 0.375 9625 97 4 0.187 4760 55 8 0.0937 2380 38 30 0.0232 590 8 Note: Sieve analysis percent Passing Other Average % protection against salt induced corrosion 90% De-icing rate (as compared to sodium chloride) 1.Ox
