1000 Chemical Injection Skid Sprayer Equipped as follow: •Powder coat finished black with formed 10 gauge steel longitudinal rails, tie down D-rings, integral tank saddles, tank hold down straps 2-bolt tension system, battery bracket and dual spray head sockets for right or left side spraying. •1000 Gallon elliptical white poly main water tank with large 16" opening, anti-siphon fill system and anti-surge tank baffles. •Two boomless nutating even section spray heads with solid brass nozzels, cab controll 30 degree tilt and 90 degree swing in-out. Nine section soleoid-regulator with quick disconnect connection from spray head. •Two 70 gallon white poly cone bottom chemical tanks with three way calibration valves, low level sensors and 2-speed agitation. Two tank close loading system. •6300 chemical rate-mechanical cab control system. Two TeeJet Legacy MT500 peristaltic chemical pumps with .05-350 ounces per minute output. •Hypro centrifugal water pump with cab controlled start/stop, water pump on-off, 1" flow meter, ground speed radar, maintenance kit and cannon plug connector disconnects skid from cab controls. •Plumbing connections quick disconnect for ase of clean-up and winterizing. •Hydraulic pump only. No gas powered. •Forklift receiver pockets •Dual Sprayheads •Remote sprayhead swing control •Rear step/platform
