Specifications include, but are not limited to: (1) Install new wireless system equipment, network switches and all other requested network equipment to support the wireless infrastructure and network backbone upgrade. (2) Install all needed cabling (fiber and/or copper) connections, patch cables and patch panels, to access points from indicated wiring closets on school building maps. (3) Test all wireless equipment across the district sites after installation. (4) Provide “hot maps” of wireless locations in each school building to include access point/array model and location. Provide a solution that accommodates the 802.11ac wireless standard. (7) Provide a solution for the network switches to include fiber modules and other components necessary. ; 1. The switch must support long-distance stacking. ll ICX switches stack on regular Ethernet ports (10G/40G/100G) and using standard Ethernet optics with distances up to 10kms. This enables single stack to span multiple wiring closets, across stairs/floors/buildings/campus. 2. The switch must stack on a regular Ethernet ports. All ICX switches stack on regular Ethernet ports (SFP+10G/QSFP+40G/QSFP28 100G) .