POTHOLE PATCHER TRUCK BID SPECS These specifications describe a self-contained patch unit, which is permanently mounted to a truck chassis to be used for patching with hot asphalt. Container: yes____ no____ Unit capacity 5 cubic yards yes____ no____ Double wall constructed yes____ no____ Minimum 2”- 6 lb. density insulation throughout yes____ no____ Minimum 3/16 GA HR steel interior sides, 10 GA HR steel exterior yes____ no____ Top loading lids have expansion corrugations yes____ no____ Top loading doors are 2”double wall constructed yes____ no____ Single hinged top lids open into a V with inside surface acting as a funnel yes____ no____ All doors hydraulically operate by cylinders yes____ no____ Material funneled to center of container yes____ no____ Hydraulic system shall operate at a minimum of 1500 PSI yes____ no____ Hydraulic controls located at right rear corner of container yes____ no____ Sloping floor shall not be less than 45° from horizontal yes____ no____ Material discharged by Kevlar belt riveted to slat chain yes____ no____ Discharge is driven through a gearbox by a hydraulic motor yes____ no____ Forward and reverse discharge controls
