Capacity: One (1) platform, minimum working load of 500 lb. and minimum tipping load of 450 lb. in all positions; height from ground to platform floor 49’ minimum when mounted on a 1 ½-ton crew cab chassis; working radius from center line of rotation 30’ minimum; overall height in travel position 13’ maximum; lower boom articulation 0° to 84°; upper boom articulation -25° to 85°; inner boom extension 103”; rotation 360° continuous Minimum working load: Minimum tipping load: Height from ground to platform floor: Working radius from center line of rotation: Overall height in travel position: Comply Yes/No: _________ Hydraulic System: The hydraulic pump shall be driven by a hot shift PTO mounted to the transmission. It shall be of sufficient size to operate all functions. The system shall have double-acting hydraulic cylinders to operate the upper and lower booms; all cylinders equipped with pilot-operated check valves to hold load in the event of system failure; rotation driven by hydraulic motor; equipped with all lines, hose fittings, valves, filters, and reservoir required to perform the function of the platform. Comply Yes/No: _________ Controls: Equipped with controls that can be operated from the platform and override controls that can be operated from the ground or truck platform; to have engine start and stop switch located at the platform, and manual two-speed throttle control Comply Yes/No: _________ Emergency Controls: System to have the ability to lower platform in emergency situation due to power loss and/ or accident. This is to be accomplished from platform or ground level. Comply Yes/No: _________
