Specifications include, but are not limited to: 1. SWAB CLEANING-CONTAINMENT Spec No. A-9101: CONTAINMENT CLEAN - DWELLING UNIT Prior to lead-hazard reduction work, set up containment in dwelling unit according to MN Rules 4761.2645. Once work is completed, properly clean dwelling unit according to MN Rules 4761.2670. Spec No. A-9102: CONTAINMENT CLEAN – COMMON AREA Prior to lead-hazard reduction work, set up containment in Common Area according to MN Rules 4761.2645. Once work is completed, properly clean Common Area according to MN Rules 4761.2670. 2. WINDOWS Spec No. A-9201: STABILIZE WINDOW/REHAB /EA Wet scrape all interior and exterior window components including sashes, jambs, stops and exterior sill. Reglaze as required. HEPA vacuum all visible dust. Spot prime interior and exterior with alkyd (oil) primer/sealer. Topcoat interior and exterior with a high quality acrylic latex paint. Spec No. A-9203: STABILIZE WINDOW CASING /SF Wet scrape interior window casing. HEPA vacuum all visible dust. Spot prime and topcoat with a high quality acrylic latex paint. Spec No. A-9210: WINDOW REPLACEMENT - JAMB LINER PACKAGE Remove, package and dispose of sashes, parting beads and inner stops. Inner stops may be reused if architecturally necessary for appearance. Wet scrape jambs and well, and back of window stool. HEPA vacuum all visible dust. Coat jambs and well from inner stops to inner edge of storm window with an encapsulant-type paint. Install a double hung, double-glazed, one-over-one or oriel window and jamb, jamb to be pulley operated or fitted with jamb liners. If jamb liners are used, existing rope and pulley system to be removed and pockets filled with insulation. If oriel window, top sash may be fixed. Sashes to be primed/sealed and finish coated to match existing paint or varnish. Laminate and back-caulk well and outer stops with .032 aluminum or vinyl coil stock. Install inner stops, prime and top coat with high quality latex or alkyd paint. If original inner stops are reused, edges are to be sanded smooth and nail holes/dents puttied