Specifications include, but are not limited to: 1. The motor grader shall have as a minimum, a 14-foot blade, three axles, 100 horsepower, and 24,000 pounds per vehicle weight. Grader should be in good condition to avoid excessive down time. All costs of maintenance and operation of unit are to be furnished by the contractor such as fuel, oil, grease, repairs and all miscellaneous operators and operating supplies. The State will not be responsible for any costs incurred by the contractor. 2. No work shall be performed under this contract until the contractor has received a written notice to proceed. Contractor must notify project supervisor 24 hour before grading the road because project supervisor needs to inspect road has it is been graded.