Specifications include, but are not limited to: Total Quantity: 1000 Brochure Holders Fabricate a 9-pocket brochure holder, utilizing high-impact (0.080) clear PETG or SUPERIOR material. 7 forward-facing pockets • Interior dimensions of 7 forward-facing pockets: 3-3/4”" width x ½" depth x 5- 1/2" height at front & 6-1/4" height at back. • ¾" rise for each front-facing pocket. 2 side-facing pockets • Interior dimensions of 2 side-facing pockets (1 pocket on each side): o 4" width x ¾" depth x 5-3/8" height. Footprint: 4-7/16" deep X 5-11/16" wide. Height:11-1/8". All corners curved. Solid bottoms on each pocket. Two3/16"holes drilled in backof unit,each drilled 3/4"from eachedgeand 1/2"fromtop. • Additional dimensions indicated on Exhibit E. • Material is required to be durable, sturdy and light weight, without cracking or other compromises in quality or structural integrity for life expectancy of the product. Edges must not be sharp and all corners must be curved. • Piece must stand up to heavy on-counter use for up to 1 yr. • With normal exposure to sunlight & industrial cleaners: substrate must not crack, chip, discolor, or become brittle.