Specifications include, but are not limited to: Pump & Motor 1.1 The pump must have 6 inch flange inlet and outlets. The pump must be capable of delivering up to 2290 Gallons Per Minute (GPM). The pump case and wear plates can be made from cast iron with the impeller may be made with cast steel, the pump shaft made from carbon steel. 1.2 The GPM at pump head pressures shall be from; 10 ft suction and 30 ft delivery, 1852 gallons, to 25 ft suction and 82 ft delivery, 823 gallons 1.3 The max working pressure shall be 91 psi with a max suction of 58 psi at a max operating speed of 2200 RPM 1.4 The pump must have interchangeable options for the impeller 1.5 The pump must be self-priming with no adjustments or controls. 1.6 The pump must have a sight glass to check oil levels if it has a mechanical seal. 1.7 The engine must be a diesel engine and be a Tier 4 Final compliant engine. 1.8 The engine must be capable of producing 60 horsepower and use 2.6 gallons per hour at 1800 rpm, 1.9 The engine must come with its own; Starter, battery, cooling system, exhaust system (with curved pipe or rain cap), control panel. 1.10 The unit is to be delivered with a extra set of filters for the engine. 1.11 The unit must be delivered with a set of owners, operators, parts and repair manuals, manuals can be in printed or digital formats.