Specifications include, but are not limited to: Thoroughly plow entire parking lot area, entry/exit ramps, parking ramps and driveways, including driveways coming into facilities, according to these specifications. Snow plowing shall automatically commence after each snow fall in excess of 2" accumulation. In the event that an accumulation of 2" has fallen prior to 3:00 a.m., Contractor shall be required to perform snow plowing activities and have this function completed before 6:00 a.m. of that day. Contractor may conceivably be required to thoroughly perform snow plowing activities more than once within a given twenty four (24) hour period, and may be called by the Building Operations Manager to perform special cleanup during normal business hours based on snowfall accumulations. Immediately after the completion of every snowplowing, Contractor shall thoroughly sand/salt drive lanes and any areas requested by site Building Operations Manager. See section 15 for site-specific requirements concerning plowing and sanding. The cost for sanding immediately following a snow fall shall be included in the contractor’s base price for snow plowing. The sanding that is referenced on the Proposal Page is for sanding above and beyond the sanding listed in the snow plowing instructions (See Section 1, Sanding/Salting). Contractor shall contact the Building Operations Manager if there is any question as to whether or not to plow. In addition, there may be areas which require hand shoveling to clear a more restricted area.
