4.1 Phase 1: Finalization of Project Plan. 4.1.1. Project Plan to remove the existing turnstiles and to furnish and install optical turnstiles to replace the existing equipment at the University Recreation and Wellness Center in Minneapolis. As part of the awarded Contractor’s proposal, the awarded Contractor must submit a Project Schedule and Work Plan, Staffing Plan, and Price List. The Final Project Plan shall include all pre-planning, site visits/ walk throughs, scheduling, and management meetings. The Final Project Plan must be approved by the University Authorized Representative before Project implementation and authorization to proceed. 4.2 Phase 2: Design, Project Planning, and Site Preparation Phase. 4.2.1. Design, Project Planning, and Site Preparation of the Recreation and Wellness Center Turnstile Replacement Project. The Contractor shall design, plan, and prepare the site for the Recreation and Wellness Center Turnstile Replacement Project per requirements and specifications below. The design/project planning/site preparation phase shall include all site visits, surveys, and layout of work. All final designs must be approved by the University Authorized Representative before the Project implementation phase. 4.2.1.1 Examination of the Site. Contractor shall visit the site to familiarize themselves with conditions at the site that may affect the performance of the work. Contractor will correlate observations from site visits with the requirements of the specifications. 4.2.1.2 Equipment Specifications (Mandatory). All equipment used for this Project must or exceed the following requirements: 4.2.1.2.1. Pedestrian Swing Gate (1) 4.2.1.2.1.1 Motorized swing gate with a transparent panel made from abrasion-resistant material. 4.2.1.2.1.2 Capable of bi-directional operation. 4.2.1.2.1.3 Integrated with access control system for controlled entry and exit. 4.2.1.2.1.4 Minimum 36-inch clear passage width. 4.2.1.2.1.5 Equipped with emergency override and fire alarm input. 4.2.1.2.1.6 User-adjustable barrier cycle and dwell times. 4.2.1.2.2. Optical Turnstile End Cabinets (1) 4.2.1.2.2.1 End cabinet units to accommodate matching optical turnstile configuration. 4.2.1.2.2.2 Transparent motorized panels with abrasionresistant surface and customizable widths to fit site conditions. 4.2.1.2.3. Optical Turnstiles (3) 4.2.1.2.3.1 Transparent motorized barrier panels with customizable widths and abrasion-resistant finish. 4.2.1.2.3.2 Controlled entry via card reader; free-pass exit mode when configured. 4.2.1.2.3.3 Sensor system must: 4.2.1.2.3.3.1 Track each user from entry to exit point. 4.2.1.2.3.3.2 Detect closely following tailgaters without generating false alarms for common carried items. 4.2.1.2.3.3.3 Detect reverse-direction passage when access is granted for the opposite direction. 4.2.1.2.3.3.4 Detect and prevent crawling or other low-height unauthorized entries via sensors placed at multiple heights. 4.2.1.2.3.3.5 Include safety sensors to prevent barrier movement when a person or object is within the barrier path. 4.2.1.2.3.4 Minimum processing speed: up to one person per second (subject to access control limitations). 4.2.1.2.3.5 Integrate with third-party access control systems via dry contact inputs and outputs. 4.2.1.2.3.6 Minimum 36-inch clear passage width. 4.2.1.2.3.7 Emergency override/fire alarm input. 4.2.1.2.3.8 User-adjustable barrier cycle and dwell times. 4.2.1.2.3.9 Compatible with industry-standard relay controller interfaces for integration with auxiliary devices. 4.2.1.2.4. Optical Turnstile Riser or Baseplate 4.2.1.2.4.1 Riser or baseplate designed for single turnstile configuration to suit site mounting requirements.
