3. Elk Gates Specification 3.1 Gates made of 2-inch galvanized steel, no paint 3.2 8ft wide by 10ft tall 3.3 11-bar 3.4 365-degree welding with zinc silver paint 3.5 Gates have approx. 2-inch-wide steel loops with drop pins 3.6 1 side with paired loops, approximately 6-inches between pairs 3.7 1 side with single loops 3.8 Includes Drop pins ~ 11-inches, 10 ga. Steel 3.9 Loop legs – 11 inches from ground to first bar 3.10 Approximate distance between fillers of 8.5 inches 3.11 Weight per gate is approximate 215 pounds 4. Walk Through Gates Specification 4.1 Gates made of 2-inch galvanized steel, no paint 4.2 8x10ft + 1ft 4.3 11-bar 4.4 365-degree welding with zinc silver paint 4.5 Loops on sides for drop pins 4.6 Walk-through gates can open (swing) freely in both directions using the drop pins and gate loops as hinges
