SPECIFICATIONS. All equipment and components listed in the specifications below must be as named or MNDOT approved equal. 6.1 CME-45C Truck Mounted Drill Rig. 6.1.1 Overall Unit 6.1.1.1 Cummins QSF 2.8, 65HP, Tier 4f, 4-cylinder turbocharged diesel industrial engine 6.1.1.2 Electric throttle 6.1.1.3 Auxiliary system hydraulic pump 6.1.1.4 Hydraulic oil cooler 6.1.1.5 Cold weather starting aid 6.1.1.6 Fuel heater 6.1.1.7 Engine protection shut down 6.1.1.8 Permanently coupled drive line 6.1.1.9 High torque rotary drive 6.1.2 Additional Options 6.1.2.1 Fuel from truck 6.1.2.2 Remote engine oil drain 6.1.2.3 Hydraulic slide base – In/Out, Sideways 6.1.3 Drill Platform 6.1.3.1 Includes undercoating 6.1.3.2 Toolboxes below deck both sides 6.1.3.3 Auger and drill rod racks above deck 6.1.3.4 For 84”CA truck 6.1.3.5 Driller’s step 6.1.4 Auger Tool Trays 6.1.4.1 Helper side deck, two tier, with retainers 6.1.4.2 Maximum capacity six (6) 4in flight augers, one with cutting head installed 6.1.5 Hydraulic Leveling Jacks 6.1.5.1 X Heavy-duty x 36in stroke 6.1.5.2 Two rear 6.1.5.3 One front with HD front bumper and tow shackles 6.1.6 Front Frame Extension and Reinforcement 6.1.7 Rear Tow Shackles 6.1.8 Tool Loops on rear of platform (2) 6.1.9 Auger Drive Pin Holding Rack 6.1.9.1 Ten pin capacity 6.1.9.2 Both sides of platform (2) 6.1.10 GPS Holding Bracket at both rear jacks (2) 6.1.11 Two Strobe Type Warning Lights
