To be considered the floating dock system must made of a high-performance UV stabilized low-density polyethylene, be 60 inches wide, provide a minimum of a 2-inch-high safety curbing on the sides, and be of similar design to an EZ Dock system or approved alternate. The Floating dock sections must be connected to shore via hinged ramp or gangway as well as provide for a kayak or canoe launch system at the open water end of the dock. Submitted bids must include delivery, labor, dock components, and hardware needed to complete the Job. All metal components and fasteners must be non-corrosive, such as aluminum, galvanized steel or stainless steel. Refer to example EZ Dock components list for a needed materials and hardware guide to complete the job. NOTICE; not all components may be included in guide. Additional materials and hardware may be needed. Refer to attached drawing for proposed design. Additional Requirements: o Dock Anchoring Requirements The dock must be anchored at: The first float The last float At every 30 feet along the dock Minimum of 3 anchor poles at last doubled float section ...
