Specifications include, but are not limited to: A vendor to provide three (3) ADA Upfit Vans for the Fleet and Surplus Services office in Arden Hills, MN. The equipment must be a newly manufactured 2018, 2019, or 2020 Dodge/Chrysler Minivan with ramp (or State approved equal). New 2019 Model Year, or newer, Dodge/Chrysler Minivans or approved equal with Ramp, each equipped with the following: 1. All Standard Options 2. Auxiliary Rear Heat/Air 3. Power Windows and Locks 4. Privacy Tint Glass 5. Keyless Entry - 2 Key Fobs 6. Cruise Control 7. Tilt Wheel 8. ADA Approved Braun Entervan Conversion III Ramp (side) or approved equal. Ramp to be manual (not power). Responders submitting an approved equal ramp should include technical specifications and ramp capabilities with response. Ramp must meet all Federal Motor Vehicle Safety Standards. 9. Two (2) Sets of Q’Straint Retractable Wheelchair Tie Down Sets – Must be Q’Straint 10. Seat Belt Extenders for every available passenger. 11. Extended Length Ramp: Side a. Width of ramp: 30” usable b. Full length of the ramp when fully extended: 62” with ramp ext. c. The ramp is 12” high at floor level. d. The height of the ramp in the folded upright “stowed” position: 34 ¼” e. The length of each section of the ramp (before and after the hinge). 30 ½”, 31 ½” 12. Back Bench Seat 13. Permanent Driver’s Seat 14. Removable Passenger Seat 15. No Middle Row Seating or Middle Row Jump Seat 16. MUST have E85 Flex Fuel Engine 17. Extended Wheel Base 18. Engine Block Heater 19. Ramp Door is to be Manual (not power) 20. Floor is to be Non-skid Vinyl or Approved Equal (not carpet) 21. State will Handle Title, Registration, and Tabs 22. Responder to include "as built"/"window sticker" with response confirming compliance with the specification. 23. Bid Price to Include Delivery 24. Daytime Running Lights 25. Backup Camera