Exterior: 1. Demo and replace all damaged; or supply and install any missing siding, channel, louvered vents and accessories. Siding pieces with a crack less than 4” in length or holes less than ¾” inn diameter may be repaired with color-matching caulk. All new pieces shall match existing. 2. Demo lean-to behind the garage. Remove ledger board and in-fill house wrap and siding to match existing. Ensure that any bolts on piers are cut flush to concrete. 3. Demo vent pipe on side of the garage. Infill opening with sheathing, house wrap and siding to match existing. 4. Demo post in center of driveway and have electrical to outlet abandoned properly. 5. Demo man-made DIY pond to the left of the driveway. Identify supply source for piping within and have it properly disconnected and abandoned. 6. Demo deck and ramp. Remove ledger board and in-fill house wrap and siding to match existing. Ensure that any bolts on piers are cut flush to concrete. Supply and install fill and black dirt to bring grade up to height of any piers sitting higher than their surrounding elevation. The goal is to at minimum have piers flush with surround yard elevation, if not able to cover them entirely; all the while, maintaining appropriate slope away from the home to ensure proper runoff. 7. Demo patio door. Modify the opening, supply and install Thermotech 60”x42” slider window. Install j-channel and 2” white brick mould and caulk around perimeter. After modified, finish this section of exterior wall by in-filling siding (color match to existing), insulation, vapor & air barriers per Spec Book. 8. Demo sheathing and replace the front of the home where its damaged from fire. Spray exposed framing with Kilz to encase odor. Finish this section of exterior wall by in-filling sheathing, siding (color match to existing), insulation, vapor & air barriers per Spec Book. 9. Demo existing window damaged in fire and replace with Spec Thermotech vinyl window. Adjust siding to fit. Install j-channel and caulk around perimeter. 10. Remove and dispose of cable wires secured around the exterior of the house. Caulk holes in the siding after removal with color matching caulk. 11. Remove and dispose of satellite dish(es). Caulk any holes in roof sheathing or siding after removal. 12. Pressure wash and clean all siding and exterior surfaces. 13. Demo all existing exterior light fixtures. Supply and install new Patriot Lighting dualux LED dual head motion sensor exterior fixtures model: E9201WH. 14. Demo and replace damaged; or supply and install missing window components, if any. 15. Supply and install all new window screens. 16. Supply and install missing gutters and downspouts, including leaf guards. 17. Supply and install concrete splash pads per Spec Book. 18. Demo and replace front house entry and rear garage man doors and frames per Spec Book, include install of aluminum clad wrap and brick mould around perimeter. Provide and install new lock sets to be keyed alike. Doors shall have satin chrome knobs not levers. 19. Supply and install storm door with chain kit for front entry per Spec Book. Door color: Almond. 20. Provide materials and labor to construct a 5’x5’ concrete pad 4” thick. Supply and install ACGuard security cage model AC GU with AC-Guard Top Bar to be anchored with ½”x 3” Red Head anchor sleeves to the 5’x5’ pad. 21. Demo existing a/c condenser. Supply and install new Lennox 14ACX condenser, controller and lineset. New condenser shall be set on 5’x5’ concrete pad. 22. Clean out all intake and exhaust vents. 23. Contractor shall supply and install any missing outlet box covers. 24. Supply and install any missing or damaged components to ensure proper function of exterior hose bibs.
