Specifications include, but are not limited to: Contractor shall provide all equipment, materials and labor to complete the work described or referenced in this rfp, provided 2025 MLB Spec Book, MN Chapter 7080 and within the provided Environmental Systems design. 1. Install an on-site septic system per the approved septic design provided by Environmental Systems dated 11/18/24. Contractor shall ensure a complete and functional system. 2. The contractor shall have the existing septic tank pumped and removed per design. Contractor shall assume existing tank holds up to 2,000 gallons. Contractor shall complete tank abandonment form and submit a copy to the Project Manager. 3. Contractor shall be responsible for obtaining a Pine County septic permit and coordinating required inspections. 4. Contractor shall be responsible for contacting the Pine County inspector to schedule inspection of scratch, tanks, rock bed and final cover. 5. Additionally, contractor must give the I.H.S. Engineer and Carla Dunkley, Project Manager, a minimum of 48 hour notice before starting the installation to schedule project site visits to see scratch, tanks and rock bed before covering. 6. Contractor shall provide an As-Built System drawing for submission to MLBO. 7. Contractor will not receive final payment until Pine County has completed a successful final inspection and issued a Certificate of Compliance; and Owner has been supplied with full lien waivers for all subcontractors and suppliers. 8. Contractor is responsible for cutting vegetation and tree removal as required to install the system in accordance to MN Chapter 7080. 9. Contractor shall follow proper MN Chapter 7080 mound prep procedure, keeping traffic off the designated mound area. Contractor shall be responsible for the cost of any: compaction testing; re-design fees; or additional costs associated with system redesign or relocation; if these expenses are incurred due to contractor or subcontractor damaging the mound location. 10. Contractor shall provide and install Polylok PL122 filter with alarm per design.
